MAIN ZONE AND ZONE 2 OPERATION

The KCT preamplifier’s two-zone operation offers a number of listening options.

Play Both Zones

This option allows you to play one input device through both zones or play a different device through each zone simultaneously, and adjust volume levels for each zone.

1.Press the power button (1) or power key (32) to switch the KCT from the stand-by to the operational mode. The front panel display (13) shows the main zone is active, the currently selected input, and main zone volume level.

2.Press the input select button (6) or key (39) to select the device you wish to play in the main zone.

3.Begin playing the device. Use the level control knob (14) or level keys (44) to adjust main zone volume to the desired level.

4.Press the zone button (10) or Z2 key (38) to select zone 2. The front panel display shows zone 2 is active, the currently selected input, and zone 2 volume level.

5.Press the input select button (6) or key (39) to choose another device to play in zone 2. You can choose the same input device to play in both zones, if you wish.

6.Begin playing the device. Use the level control knob (14) or level keys (44) to adjust zone 2 volume to the desired level.

To turn off this option:

1.Press the Z2 key (38) to select zone 2.

2.Press the power button (1) or power key (32) once. This turns off zone 2 and switches you to the main zone.

3.Press the power button or key again to turn off the main zone and return to the stand- by mode.

Play Either Zone

This option allows you to play an input device in either the main zone or zone 2.

Main Zone Only

1.Press the power button (1) or power key (32) to switch the KCT from the stand-by to the operational mode. The front panel display shows the main zone is active, the currently selected input, and the main zone volume level.

2.Press the input select button (6) or key (39) to select the device you wish to play in the main zone.

3.Begin playing the device. Use the level control knob (14) or level keys (44) to adjust the main zone volume to the desired level.

4.Press the main zone key (37) again. The preamplifier returns to the stand-by mode.

22

Krell Current Tunnel

Page 26
Image 26
Krell Industries KCT manual Main Zone and Zone 2 Operation, To turn off this option, Main Zone Only