Zone 2 Only
1.With the KCT in the
2.Press the input select key (39) to select the device you wish to play in zone 2. The KCT will switch to the operational mode and the device will play in zone 2 only.
3.Press the zone button (10) or Z2 key (38) again. Zone 2 stops playing and the KCT switches back to the
Note:
When you press the power button (1) or key (32) to return to the operational mode, the KCT is in the main zone.
Play and Record
This option allows you to play an input device through the main zone while sending output from another device through zone 2 for recording. You can also record through the main zone and listen through zone 2.
1.Press the power button (1) or key (32) to switch the KCT from the
2.Press the input select button (6) or key (39) to select the input device that you want to play through the main zone.
3.Begin playing the device. Use the level control knob (14) or level keys (44) to adjust the main zone volume to the desired listening level.
4.Press the menu button (15) or key (41) to select the main menu. The front panel display (13) shows MENU.
5.Use the level control knob (14) or level keys (44) to select the TAPE OUTPUT MENU.
6.Press the enter button (16) or key (42) to access the submenu. The front panel display shows OUTPUT FROM ZONE1.
7.Use the level control knob (14) or level keys (44) to select OUTPUT FROM ZONE2.
8.Press the menu button or key to exit the main menu.
9.Press the zone button (10) or Z2 key (38) to select zone 2.
10.Press the input select button (6) or key (39) to select the input device that you want to record through zone 2. Begin playing the device.
11.Press the tape button (7) or key (40). The front panel display shows TAPEOUT ZONE2. The input will begin recording through zone 2. The front panel display shows TAPE MONITOR after three seconds.
While you are recording through zone 2, you can also press the zone button (10) or main zone key (37) to check playback through the main zone, without interrupting the recording through zone 2.
Krell Current Tunnel | 23 |
