37 Main Zone Key

Use this key to select the main zone (the main listening or viewing area). The red main zone LED (11) on the front panel illuminates when the main zone is activated.

38 Z2 Key

Use this key to select zone 2. The green zone 2 LED (12) illuminates when zone 2 is activated.

Note

Both zones can play simultaneously.

39 Input Select Keys

Use these keys to select the corresponding rear panel input that is connected to a CAST (C-1, C-2), balanced (B-1, B-2), or single-ended (S-1, S-2, S-3) analog source. The front panel display (13) shows the selected input, the active zone, and volume level.

40 Tape Key

Use this key to select the corresponding rear panel input that is connected to a tape analog source. When TAPE is activated, the front panel display (13) shows the zone that is the pathway for the tape output. See Tape Output Menu, on page 30.

Menu Functions

41 Menu Key

Use this key to access the menu options for customizing the KCT. The front panel display (13) shows MAIN MENU and submenu name. See Customizing the KCT Preamplifier, on page 26.

42 Enter Key

Use this key to access submenu selections.

Level Control

43 Bal(ance) Key

Use this key, along with level keys (44) or level knob (14) on the front panel, to balance output levels. The front panel display (13) shows balance status for three seconds.

44 Level Keys

Use these keys to increase or decrease system volume level or, with the balance key (43), to adjust balance. The level keys are also used to select menu options to customize the KCT. See Customizing the KCT Preamplifier, on page 26.

16

Krell Current Tunnel

Page 20
Image 20
Krell Industries KCT Main Zone Key, 38 Z2 Key, Input Select Keys, Tape Key, Menu Key, Enter Key, Balance Key, Level Keys