BackPanel Description
SeeFigure 2 on page7
The back panel of the KPS28c provides Con- nections for analoganddigital outputs, power, and remotecontrol inputs. Backpanel features andtheir descriptionsfollow.
Analog Outputs
13 Left and Right CASTOutputs
TheKPS28c is equippedwith onepair of analog outputswith
14 Left and Right BalancedOutputs
TheKPS28c is equippedwith one pair of bal- ancedanalog outputs with XLRconnectors.
15 Left and Right Single-endedOutputs
TheKPS28c is equippedwith one pair of sin-
Digital Outputs
16Optics Output
The KPS28c is equipped with an EIAJ fiber optic output with a TosLinkconnector.
17 Coaxial Output
TheKPS28c is equippedwith an S/PDIFcoax- ial audio output with an RCAconnector.
Back Panel RemoteConnections
18 12 VDCIn
The KPS28c is equipped with an input that receives 12 VDCpoweron/off (12 Volt trigger) signals from other Krell componentsand from other devicesthat incorporatea 12 Volt trigger.
This allows you to activate the KPS28c through another Krell componentand through other componentsin a custominstallation, to easily coordinate whole systemsor portions of sys- tems.
Notes
The12 VDCinput poweris limited to 30 ma.
Consult the owner's reference manual of the componentsusedin a custominstallation to take full advantageof the remotecapabilities of the KPS28c.
19 RC-5In
The KPS28c is equipped with an
Power
20IEC Power Connector
TheI ECconnectoris for use with the provided IEC standard 15 ampACpowercord.
21 Line Fuse
The50/60 Hz line fuse protects the KPS28c against short circuits from the external AC power.
NOTE
Replacefuses only with the fuse value specified on the backpanel.
8 | Krell PlaybackSystem28c |