Krell Industries KPS 28c manual Operating Your KPS28c, Poweron, Howto Write A Program

ConnectingYourKPS28c, continued

SeeFigure 2 on page7

Note

Youcan set up your KPS28c to play a musi- cal selectionin three different areas.Connect the CASToutput to a CAST-enabledsystem in onelistening area, the balancedoutput to a systemin a secondlistening area, andthe single-endedoutputto a systemin a third lis- tening area. Themusicalselection will play simultaneouslyin all three areas.

4.Connectthe cables from your digital audio or video sourceto the optics output (16) coaxial (17) digital output on the KPS28c back panel.

IMPORTANT

Whenswitching betweenactive sources, always lower the volumeto off or mutethe output. This ensures that the next source played does not damageyour systemwith a high output transient.

POWERON

1.Connect the AC power cord to the IEC powerconnector (20), then connect the powercord to the wall socket. TheKPS28c is in the stand-by mode.Thered stand-by LED(3) illuminates.

2.Pressthe powerbutton (4) or pwr key (22) to switch the KPS28c from the stand-by to the operational mode.The blue powerLED

(5)illuminates and you hear a click. The KPS28c is ready to play music.

Operating Your KPS28c

This section provides moreinformation about operating the KPS28c.

TO PLAY A COMPACTDISC

1.Usethe open/close button (2) or openkey

(23)to openthe compactdisc transport (1).

2.Place a compactdisc on the transport.

3.Usethe open/close button (2) or openkey

(23)to close the compactdisc transport (1). Playbackautomatically beginsfromthe first track. Adjust system volumethrough your preamplifieror amplifier.

4.Pressthe stop button (11) or key (28) to compactdisc playback.

Note

Youcan also begin track playback by pressing the play button(12) or key(29), or select a track using the direct track accesskeypad(26), the track forward and back buttons (8, 9) or keys (30) or the search forward andbackkeys (31).

HOWTO WRITE A PROGRAM

This short-term programminglets you store a maximumof 20 tracks in a programsequence.

Note

Trackforward,track back,repeat, andpausefunc- tion normally within a programmedsequence.For a description of these remotecontrol keys, see

RemoteControlDescription, pages10-11.

1.Press the prog (program) key (34) on remote control. PROGRAMappears in the compactdisc display (7).

Krell PlaybackSystem28c 13