Krell Industries MP3 Docking Station 1UNPACK the KID, Unpack the Papa Dock, Operation

Unpacking the KID Unpacking the Papa Dock

Insert the iPod-device into the KID Dock Connector Power LED Color Guides

Operation

1UNPACK THE KID

One person can remove the KID from its shipping box safely and easily.

1. Open the shipping carton top flap. You see the literature pack containing:

1 Owner’s Reference

1Warranty Registration Card

2.Remove the literature pack and the top layer of foam to view:

1KID

1Accessory tray containing: 1 AC power cord

1 KID remote control

1 CR2025 lithium battery

1 iPod-device support(under the accessory tray)

3.Face the front of the shipping box and remove the foam insert containing the AC power cord by pulling the insert straight out of the box.

4.Set the remote and the AC power cord aside, for later use.

5.Insert your hands below the left and right foam inserts surrounding the KID.

6.Lift the KID with the foam inserts straight out of the box.

7.Place the KID on a safe, clean work surface, on its side, resting on a foam insert.

8.Remove the other foam insert.

9.Reposition the KID on the work surface, with the remaining attached foam insert tilted up.

10.Remove the second foam insert.

11.Remove the foam enclosing the component.

12.Place the KID on its feet, right side up, on the work surface. You are now ready to affix the iPod-device support to the chassis.

FIGURE 4 Inserting the iPod-device Into

the Dock Connector

1

4

POWER	BASS	TREBLE	VOLUME	AUX
				INPUT

UNPACK THE PAPA DOCK

One person can remove the Papa Dock from its shipping box safely and easily.

1.	Open the shipping carton top flap. You see a
	protective cardboard sheet.
2.	Remove the protective cardboard sheet to view:
	1 Papa Dock

4.	Insert your hands below the left and right foam
	inserts surrounding the Papa Dock.
5.	Lift the Papa Dock with the foam inserts
	straight out of the box.
6.	Place the Papa Dock on a safe, clean work
	surface, on its side, resting on a foam insert.

INSERT THE IPOD-DEVICE INTO
7 THE KID DOCK CONNECTOR	2.	Center the iPod-device connector against the
When the KID or the Papa Dock are plugged into
AC power, connect the iPod-device:		KID dock connector (4).
1. Hold the iPod-device in both hands as shown	3.	Push down on the top of the iPod-device
in the illustration above, using the iPod-device		gently but firmly until its connector plugs into
support (1) as a guide.		the KID dock connector.

1 Accessory box containing:
1	AC power cord
1	12 VDC (12 V trigger) cable
1	T-10 Torx wrench
1	Literature pack containing the Owner’s
	Reference and Warranty Registration
	Card
3. Remove the accessory box by pulling it
straight out of the box.

7.	Remove the other foam insert.
8.	Reposition the Papa Dock on the work sur-
	face, with the remaining attached foam insert
	tilted up.
9.	Remove the second foam insert.
10.	Remove the foam wrapper from the component.
12. Position the Papa Dock in the listening area.

KID Power LED Color Guide. When the KID is plugged into AC power, the power LED illuminates as follows:

Red The KID is in stand-by mode.

Blue The KID is on, in the operational mode, in- dicating that an iPod-device is connected.

Purple The KID is on, in the operational mode, and an iPod-device is not connected.

Papa Dock Power LED Color Guide. When the Papa Dock is plugged into AC power, the power LED on the front panel illuminates as follows:

Red The Papa Dock is in stand-by mode. Blue The Papa Dock is on, in the operational

mode, when the KID is connected to the Papa Dock and the iPod-device is inserted into the KID dock connector.

OPERATION

ITEMS NOT IN THE SHIPPING BOX. If any of the	PACKING MATERIALS. Save all packing materi-
items listed above are not included in the shipping	als. To ship the KID or the Pap Dock in the future,
box, please contact your authorized Krell dealer or	repack the unit in its original packaging to prevent
distributor.	shipping damage. For more information, see the
	Return Authorization procedure, in the Service sec-
	tion of the Krell website at www.krellonline.com.

8 When the iPod-device is connected to the KID, you are ready to play music. When the KID is con- nected to the Papa Dock and an iPod-device is inserted into the KID dock connector, the KID pow- ers on the Papa Dock.

1.Press the play key (33) on the remote.

2.Adjust the volume (27) using the buttons on the KID front panel or the keys on the remote. Numerical values indicating the volume level appear in the display window.

3.Adjust the bass tone control (25) using the buttons on the KID front panel or the keys on

the remote. Numerical values indicating the bass tone level appear in the display window.

4.Adjust the treble tone control (26) using the but- tons on the KID front panel or the keys on the remote. Numerical values indicating the treble tone level appear in the display window.

5.Press the stop key (34) to end playback.

6.Press the play button or key to begin playback again.

For a complete list of functions, see page 10.

4 Krell / Papa Dock Krell / Papa Dock 9