STEALTH FEATURES
DIGITAL TAPE LOOP
TheTapeoutput is used as a direct digital output for a digital recordingsystem. Thedigital source youwa.nt to re.cord is selected by:the Input switch. Tolisten to the clig~ital source select S:ourceon the Source/Monitor.
switch. Tolisten.to th6 Tapeoutput duringor after the. recording select Monitoron the Source/Monitorswitcla.
NOTE:The Tapeinput can also be used as an additional source input.
CAUTION:The Tape output is a dig!tal signal and can not be used as an analog output to clrlve front end compo- nents such as a preampfifier.
PHASE SWITCH
The Phase Switch can reverse output phase. In some studio recordings the master tape wasrecorded out of phase, creating unusually poor soundingrecordings..The STEALTHcan reverse the normal 0 degree.output.plaase 180degreesto correct for this anomaly.Utilizing tlae PhaseSwitchcan, in someinstances, restore lif6 to a previously dull soundingrecording.
EMPHASIS LED
Youwill notice that somediscs, or tracks within a disc, activate the EmphasisLED.This signifies that the re- cordedmaterial had emphasisfiltration used during the recor.ding process. Emphasisis a recording industry equalization network, similar to phonoRIAAequaliza- tion, intendedfor noise reduction.
8
