F.PROCESSOR OPERATION AND DIGITAL TAPE LOOP
1.Select an input with.the Input switch. Noticethe Signal LEDwill illuminate whenthe digital source is turned on and has linked with the processor. Oncethis link is com- plete the processoris readyto pass a signal.
2.Besure that your preamplifier's volumecontrol is completely turned to the OFF(lowest volume)position.
3.Turn ONyour components,rememberingthat the last
componentto be energized should be your amplifier. The amplifier should
ponents in the systemhave been on for at least two min- utes. This will ~nsurethat there will not be anylarge pulse created whenthe amplifier is turned on.
-
4. Switchthe selector source of your preamp.tothee pgsi tion correlating to your choseninput connectiontor the
STEALTH.
5. Youmaynowstart playing your digital source, DAT, CDor satellite.
6. Slowlyturn the volumecontrol up to the lowest level you can hear. Checkto see that both channels are work- lng correctly before advancingthe volume.
NOTE:While your STEALTHwill perform beautifully from the momentyou turn it on, it requires a minimum warmup period of 8 hoursbefore it will reach its full. son!c potential. Discre.te componentsare utilized in the analog output stage and the warmup period allows them to reach thermal equilibrium.
r
fYuO~Uhinstallation is nowcomplete.Sho.uldyouhaveany er questions whichare not covered in the remainder
of this manual,contact your authorized Krell dealer. We wish youmanyhours of listening fulfillment.
7
