-18-
Removal of System Power Chassis
The system power chassis is pre-installed in the system unit when sys-
tem unit is shipped from factory. The chassis is designed for easy un-
installation from system unit in case of any inspection purpose. How-
ever, note that this removal only can be performed by a well-trained
technical person.
For safety reason before removing the power chassis, make sure:
•The power switch is turned off.
•The power cord is disconnected from the power chassis.
To remove the chassis, unscrew two chassis screws until they are re-
leased from system chassis, hold the handle and pull the chassis out
from the system chassis smoothly. See the following example figure: