-33-
4.2 SNMP Menu
Select [2] from Setup menu to perform SNMP related settings. The fol-
lowing figure illustrates the SNMP menu:
---------------------------------------------
Snmp Menu
[0] Print this menu
[1] View Snmp Setting
[2] Set Snmp Name
[3] Set Snmp Location
[4] Set Snmp Contact
[5] Set Snmp Community
[6] Set Snmp Trap Manager
[7] Exit
Please Select (0-7 )....
INET>
---------------------------------------------
SNMP related settings are:
Name : Logic name for the system (127 characters)
Location : Location where the system is installed (127 characters)
Contact : Contact person regarding the system (127 characters)
Community : SNMP communities to which the system belongs and
access right to the system ( R : read only, W : read/write)
Maximum of four communities are supported.
Trap manager: IP address of the trap host to which a trap is issued
and the trap community to which the system belongs.
Maximum of three trap hosts are supported.
[Esc] key can be used to abort unfinished setting.