Manuals / KTI Networks / TV and Video / TV Converter Box

KTI Networks KC-300D manual Making FX Port Connection, Ref. distance, Model, Connector, Wavelength

Models: KC-300D

1 21

Download 21 pages 13.03 Kb

Page 16

2.5 Making FX Port Connection

FX port operates on 100Mbps and full duplex (factory default). A variety of fiber options is provided as follows:

Duplex Fiber Series
Model Connector		Wavelength	Fiber	Ref. distance
300D-T	ST	1310nm	Duplex MMF	2km
300D-C	SC	1310nm	Duplex MMF	2km
300D-JM	MT-RJ	1310nm	Duplex MMF	2km
300D-VM	VF-45	1310nm	Duplex MMF	2km
300D-SA2	SC	1310nm	Duplex SMF	20km
300D-SL2	SC	1310nm	Duplex SMF	20km
300D-SL3	SC	1310nm	Duplex SMF	30km
300D-SL4	SC	1310nm	Duplex SMF	40km
300D-SL6	SC	1310nm	Duplex SMF	60km
300D-SL7	SC	1310nm	Duplex SMF	70km
300D-SL9	SC	1310nm	Duplex SMF	90km
300D-SL10	SC	1550nm	Duplex SMF	100km
300D-SL12	SC	1550nm	Duplex SMF	120km

Duplex Fiber CWDM Series

Model	Connector	Wavelength	Fiber	Ref. Distance
300D-CxxW40	SC	Tx 1xx0nm	SMF	40km
		Rx 1100 - 1650nm
300D-CxxW80	SC	TX 1xx0nm	SMF	80km
		RX 1100 - 1650nm

Tx 1xx0nm : 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610nm

-16-

Image 16

KTI Networks KC-300D manual Making FX Port Connection, Ref. distance, Model, Connector, Wavelength, Fiber

Contents

KC-300D Series Installation Guide 10/100BASE-TX TO 100BASE-FX MEDIA CONVERTERSDOC.060215-KC-300D United States InternationalEthernet is a registered trademark of Xerox Corp Table of Contents 2. Installation3. Optional Configuration Settings 1. Introduction1.1 Key Features 1. Introduction1.2 Specifications Twisted-Pair Interface TPPortTP Port Configuration Auto-negotiation defaultStore-and-forward default Multimode MMF - 50/125, 62.5/125 ∝ mLEDIndicators DC Power InputCenter Connector Optical signal is detectedBasic Information MechanicalEnvironmental CertificateDuplex Fiber Series 1.3 Optical SpecificationsSingle Fiber Bi-Di WDM Series 1.4 Special Functions Far End Fault FunctionAutoMDI/MDI-XFunction Auto-negotiation FunctionLink Fault Pass Through Function 2.1 Unpacking 2. Installation2.2 Mounting the Device 2.3 Applying Power The AC Power Adapter SpecificationsConfiguration Setup 2.4 Making TP Port ConnectionNetwork Cables 2.5 Making FX Port Connection ConnectorRef. distance ModelSince the WDM single fiber media converters use different wavelengths for transmission and receiving respectively, the link partner device lo- cated on the remote end of the single fiber should match the wavelength used on the single fiber converter Link Fault Pass Through Function is disabled 2.6 LED IndicatorsLink Fault Pass Through Function is enabled 3. Optional Configuration Settings 3.1 User Inaccessible Jumpers3.1.1 Forwarding Mode Setting JP1 JP1 SettingTP port to/from FX port Forwardmethod3.1.3 FX Duplex Setting JP3 3.1.2 802.3x Function Setting JP23.2 JP1-JP3 Factory Default Settings