KTI Networks KC-300D manual Multimode MMF - 50/125, 62.5/125 ∝ m, TP Port Configuration

Fiber Optic Interface (FX Port)
Signal Compliance		IEEE 802.3u 100BASE-FX
Connector		SC, ST, MT-RJ, VF-45, LC or Single SC
Data Speed		100Mbps
Duplex Mode		Full-duplex and optional half duplex
Cable Types		Multimode (MMF) - 50/125, 62.5/125 ∝ m
		Singlemode(SMF)-9/125∝ m
Supported Link Distance		MMF up to 2km
		SMF up to 100km
		Single SMF WDM up to 40km
Eye Safety compliance		IEC825 Class 1
User Accessible Settings (SW)
NO.	SETTING	STATE	FUNCTION
SW1	TP Port Configuration	OFF	Auto-negotiation (default)
		ON	Forced mode
SW2	TPPortDuplex	OFF	Fullduplex(default)
		ON	Halfduplex
SW3	TP Port Speed	OFF	100Mbps (default)
		ON	10Mbps
SW4	Link Fault Pass Through OFF		Disable (default)
SW5	Reserved	ON	Enable
OptionalSettings(UserinaccessibleJP1-JP3onboard)
NO.	SETTING	STATE	FUNCTION
JP1	Forwarding mode	Open	Store-and-forward (default)
		Short	Smart-forward mode
JP2	802.3x function	Open	Enable (default)
		Short	Disable
JP3	FX port duplex	Open	Full duplex mode (default)
		Short	Half duplex mode

-7-