2.6 LED Indicators
Link Fault Pass Through Function is disabled
LED | Display | Status Interpretation | |
PWR | Power status | On | Power on |
|
| Off | Power off |
TP LINK | TP port link status | On | Link up and no traffic |
|
| Off | Link fault |
|
| Blink | Rx/Tx activities |
TP 100M | TP port speed status | On | 100Mbps |
|
| Off | 10Mbps |
TP FDX | TP port duplex status | On | Full duplex |
|
| Off | Half duplex |
|
| Blink | Collisions on half duplex |
FXLINK | FX port link status | On | Link up and no traffic |
|
| Off | Link fault |
|
| Blink | Rx/Tx activities |
FXOL | FX port optical link | On | Optical signal is detected |
|
| Off | No optical signal is detected |
Link Fault Pass Through Function is enabled
TP LINK FXLINK FXOL | Interpretation | ||
On | On | On | Both TP and FX ports link up |
Off | Off | On | (1) TP port link fault or |
|
|
| (2) FX port received FEFI signal |
|
|
| (FX port Tx path failed.) |
Off | Off | Off | (1) TP port link fault or |
|
|
| (2) FX port Rx link failure detected |
