Oricom 9400, 9800 manual Default Setting

Advanced Settings 41

4.Select NO, if you do not want to de-register.

5.If you select 1YES, press the [ ] button and MOVE NEAR TO BASE displays for 2 seconds, then CONFIRM? 1YES 2NO appears in the display.

6.Press the touch-tone pad to select 1YES or 2NO, or use the [ ] or [ ] button to scroll to 1YES or 2NO.

7.If you select YES, press the [ ] button to confirm. You will hear a confirmation tone. Then HANDSET X DEREGISTERED shows in the display to confirm the handset is deregistered.

Note:

When you complete the de-registration process, HANDSET NEEDS REGISTRATION shows in the display. To use the handset, you MUST re-register the handset using the Registration process.

Default Setting

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

From the Handset Setup Menu:

1.Press the [ ] or [ ] button to scroll to the DEFAULT SETTING sub-menu.

2.Press the [ ] button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. The default setting is “2NO”.

3.Use the keypad to select 1YES or 2NO, or use the [ ] or [ ] button to move the cursor to 1YES or 2NO.

Note:

If you choose YES all the settings in the programmable menu are returned to factory default setting.

4.Press the [ ] button to save your selection. You will hear a confirmation tone.