13
Standby Screen
The handset displays the handset number and user name.
USERNAME
HANDSETX
Programming Functions
The system uses a menu structure to give you access to
allof thebuilt-in features.Youmayprogram thefollowing
itemsinmain menu:RoomMonitor,DTAMMessagesand
Handset Setup.
Room Monitor (applicable only with additional handsets)
1. MakesureyourphoneisOFF(notintalkmode).
2. Press the [ ] button to go to the main menu.
3. Pr ess  the  [ ▼ ] or [ ▲ ]buttonto scrolltoROOM
MONITOR.
4. Press [ ] buttontoenter ROOMMONITORmenu,
ROOMMONITOREXTENSION?showsinthedisplay.
5. Use the keypad to enter the handset number to be
monitored, either 1 or 2.
Note:
When this phone system is expanded (up to 6 handsets),
handsetsarenamed HANDSET1,HANDSET2,
HANDSET3,HANDSET4, HANDSET5and HANDSET
6 respectively.
6. The receiving handset will turn on the microphone and
the originating handset will turn on the speakerphone to
monitor sound from the receiving handset.
Note:
For room monitoring mode to work, the originating
handset must NOT be on the cradle.
While in room monitor ing mode, the handsets will emit
an alert tone approximately every 5 seconds if there is an
incomingcall.Youmaypressthe[ ]buttontoquitroom
monitor and answer the call.
While in room monitor ing mode, the originating handset
can be switched to monitor by handset earpiece
by pressing the [ ] button once. Switch back to
speakerphone by pressing the [ ] button once.
Press the [ ] button on the handset to exit room
monitor mode.
HANDSET SETup