GETTING STARTED 7
Set Country
After the phone is fully charged you will need to select your country. The default setting is Australia.
1. Press the [ 
] or [ ] button to scroll to the SET COUNTRY
2.Press the [ 
] button to enter the menu. SET
COUNTRY 1AUS and 2NZL shows in the display.
3.Use the keypad on the handset to select 1 or 2, or use
the [ 
] or [ ] button to scroll to your selection. 1AUS is the default setting.
4.Press the [ 
] button to confirm. You will hear a confirmation tone.
Wall Mounting
1.Turn the base over.
2.Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the back of the base. Then push down and snap the pedestal into place.
3.Slip the mounting holes (on the back of the base) over the wall plate posts, and slide the unit down into place. (Wall plate not included.)
Note:
If desired, gather the extra telephone line and power adaptor cord together and store inside the wall mounting pedestal.
