28CALLER ID
1.When the handset receives a second call, the number of the caller appears on the display. It will display for 20 seconds or until you press a key on the phone.
2.Press [ R ] wait for dial tone, then press [ 2 ] to put the current call on hold and talk with the second caller.
3.Subsequent presses [R ] to listen for dial tone then press [ 2 ] will toggle you between these 2 callers.
Receiving CID Records
When you receive a call, the Caller ID information is transmitted between the first and second ring. The Caller ID information appears on the display while the phone rings, giving you a chance to monitor the information and decide whether or not to answer the call.
Storing CID Records (In CID Memory)
If you are not at home or cannot answer, your telephone’s Caller ID memory stores the data for the 40 most recent calls you received so you can see who called while you were unavailable. When the 41st call is received, the oldest Caller ID record (1st call) is automatically deleted.
You may review the stored information at any time. Calls received since your last review show as NEW in the display. Calls that have not been previously reviewed but were received from the same number more than once show as REPT in the display.
Reviewing CID Records
As calls are received and stored, the display is updated to let you know how many calls have been received. To scroll CID records:
1.Make sure the phone is OFF (not in talk mode).
2.Press the [ ] button to review the newest CID record.
3.Press the [ 
] button to review the oldest CID record first.
Dialling a CID Number
1. Make sure the phone is OFF (not in TALK mode).
2. Use the [ | ] or [ | ] button to display the desired |
record. |
|
|
3.Press the [ 
] or [ 
] button. The number dials automatically.
Note:
Depending on (a) how the incoming caller’s phone number is formatted when it is received, and (b) whether or not you previously 
] button to adjust the number, and try again.
