![](/images/new-backgrounds/1315155/31515519x1.webp)
Adjustments
9.Changing Spindle Speed: The
Drill Press has five spindle speeds. To change, lift the cover with the handle
10.Loosen the motor lock knob
11.Move the drive belt to the desired speed position, refer to speed chart inside belt cover. Manually move the motor away from the feed handle until the belt is tensioned, tighten motor lock knob. The belt is properly tensioned when the deflection distance is 1/2” when pushed by hand (Fig.11).
A
Fig.09
AB
Fig.10
Fig.11
10