5100TK OPR 6270US R060106
MIXER OPERATION
Always refer to Operating Safety Precautions and Safety Decal sections of this manual before operating this mixer.
HAY STOP ADJUSTMENT
Do not adjust the Hay Stops while the mixer is running. Moving feed inside the mixer can make the Hay Stop move suddenly causing injury to the person making the adjustment.
Never operate the mixer without the Hay Stop Lock Bolt installed.
The Hay Stop Lock Bolt prevents the hay stop from rotating past the intended range of operation. If the hay stop bolt and the positioning pin are removed, the hay stop may protrude into the mixer contacting the moving auger causing damage to the hay stop and the auger.
Lock Bolt
Lock Nut
22
Back to Table of Contents
