7
FIG. 5
CLEANING
The enamelled grids, enamelled covers “A”, “B” and
“C”, and burner heads “M” (see fig. 4 and 4/A) must
also be washed and the ignition elements “AC” and
safety cut-off sensors “TC” (see fig . 5) must be
cleaned. Do not wash them in the dishwasher.
Cleaning operations must be carried out when the
hob and components are not hot and the use of
met al scou ring pa ds, pow der ab rasi ves and
corrosive sprays must be avoided.
Do not allow vinegar, coffee, milk, salt water, lemon
juice or tomato juice to remain in prolonged contact
with the surfaces.
WARNINGS:
when rea ssembling the components, observe
the following recommendations:
- check that the holes in the burner heads “M”
(fig. 4) are not blocked by foreign bodies.
- Ensu re that the enamelled covers “A”, “B”
and “C” (fi g. 4 and 4/A ) ar e co rrec tly
positioned on the burner head. The covers are
correctly positioned on the head when they
are perfectly stable.
- If the openin g an d clo sing of an y val ve is
awkward, do not force it but requ est urgent
int erve ntion by th e t echni cal ass ista nce
service.
- Do not u se je ts of s tea m to cl ean t he
appliance.
- To prevent difficulties with lighting, regularly
clea n th e i gniti on e lemen ts ( ceram ic a nd
electrode) and safety cut-off devices.
FIG. 4 FIG. 4/A
FIGURE 1