CLEANING
The enamelled grids, enamelled covers “A”, “B” and “C”, and burner heads “M” (see fig. 4 and 4/A) must also be washed and the ignition elements “AC” and safety cutoff sensors “TC” (see fig. 4/B) must be cleaned. Do not wash them in the dishwasher.
Cleaning operations must be carried out when the hob and components are not hot and the use of metal scouring pads, powder abrasives and corrosive sprays must be avoided.
Do not allow vinegar, coffee, milk, salt water, lemon juice or tomato juice to remain in prolonged contact with the surfaces.
WARNINGS:
when reassembling the components, observe thefollowingrecommendations:
- check that the holes in the burner heads “M” (fig.4)arenotblockedbyforeignbodies.
- Ensure that the enamelled covers “A”, “B” and “C” (fig. 4 and 4/A) are correctly positioned on the burner head. The covers are correctly positioned on the head when they areperfectlystable.
-If the opening and closing of any valve is awkward, do not force it but request urgent intervention by the technical assistance service.
-Do not use jets of steam to clean the appliance.
-To prevent difficulties with lighting, regularly clean the ignition elements (ceramic and
IMPORTANT:
when removing the burners to clean them, ensure that all parts are correctly positioned before relighting them. In particular for the “Dual” burner, never remove the central disc underneath the lid (particular A - fig. 5), for cleaning. Should this operation be necessary, it must be carried out exclusively by qualified personnel.
Do not remove the metal disc “B” screwed onto the burner.
FIGURE 1
FIG. 4
FIG. 4/A
FIG. 4/B
5
8
