Kyocera K612 Making a call using digit dialing, Using voice features with hands-free headset

82-N8757-1EN.book Page 59 Wednesday, April 26, 2006 10:47 AM

Erasing voice tags

To erase all voice name dial recordings in your phone:

1.Menu → Settings → Call options → Erase voice dial.

2.Select Yes.

–Say “Verify” to cause phone to repeat the set of digits that you input.

–Say “Cancel” to exit voice recognizer and return to the main screen.

–Speak a digit to enter the next digit. Once the phone repeats the digit, you can speak the next digit or pause to hear the prompt.

Making a call using digit dialing

When using digit dialing, you speak digits to dial a phone number.

Note: You cannot speak a string of digits. You must speak one digit at a time and wait for the prompt.

1.From the main screen, press . The phone responds: “Say a name or say Dial.”

2.Say “Dial”. The phone responds: “Speak a digit.”

3.Speak the first digit of the phone number you want to call. Once the phone repeats the digit, you can speak the next digit.

If you pause, the phone prompts you with the following five options. After the prompt, speak an option.

–Say “Clear” to erase the last digit entered. The phone responds: “Digit cleared.” To clear the entire phone number, say “Clear” again. When the phone prompts you with “Clear entire phone number?”, say “Yes” to clear or “No” to cancel.

–Say “Call” to dial the number.

Using voice features with hands-free headset

You can use voice commands to make a phone call or to answer the phone only if your phone is connected to a hands-free headset

(sold separately).

Note: The following features apply only to hands-free headsets unless noted.

To shop for hands-free headsets, visit www.virginmobileusa.com.

Waking up the phone

If your phone is connected to a hands-free headset, you can use the voice command to activate the phone to make a phone call.

Note: Voice Wake-up does not work with Keyguard active.

To activate the Voice Wake-up setting:

1.Select Menu → Settings → Call options → Voice wake-up → With accessory.

2.Select Menu → Settings → Keyguard → Disabled, then press .

User Guide for Switch_Back 59