60 Using Voice Recognition
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page60.
Answering the phone
You can set your hands-free headset to (1)
answer automatically or (2) answer using a
voicecommand.
Answering automatically
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free headset.
• Select Menu → Settings → Accessories →
Call answer → After 5 seconds.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free headset.
• Select Menu → Settings → Accessories →
Auto-Answer → Disabled.
To activate the Voice Answer setting:
1. Select Menu → Settings → Call options →
Voiceanswer.
2. Highlight Enabled and press .
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” If the caller is
recognized as a contact entry in your phone, then
the phone says “Incoming call from
(Name),answe r?”
• Say “Yes” or press any key except .
Ignoring an incoming call
To ignore an incoming call, do one of
thefollowing:
• Say “No” and press to silence
thealer t.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
main screen.
Training voice recognitionIf your phone is having trouble recognizing your
voice, you can train it with the commands Yes,
No, and Wake up.
1. Select Menu → Settings →Call options.
2. Select Voice training.
3. Read the message and press the left softkey
to select OK and continue. Cancel
returns you to the previous screen.
4. SelectTrain All or the item you want to train.
5. Follow the prompts for each word until
training is complete.
82-N8757-1EN.book Page 60 Wednesday, April 26, 2006 10:47 AM