Preparation for Usage

2-18

Loading Originals in the Document Processor (option)
Use the optional document processor to automatically read multi-page originals one page at a time.
Also automatically turn over and read both sides of two-sided originals.
The document processor supports the following types of originals.
Precautions on Types of Originals for Document Processor
Do not use the document processor for the following types of originals. Additionally, if originals have
punched holes or perforations, load them with the holes or perforations away from the leading edge.
Transparent films such as OHP transparencies
Delicate originals such as carbon paper, heavily crumpled paper, or vinyl sheets
Irregularly shaped (non-rectangular) originals, wet originals, or originals containing adhesive
tape or glue
Remove clips or staples and straighten any curls, wrinkles, or creases before loading. Failure to
do so may cause the originals to jam.
Originals with cut-out sections or with very slippery surfaces
Originals with correction fluid that has not dried
Straighten the folds of bent originals before loading. Failure to do so may cause the originals to
jam.
Document Processor Part Names
1Original table
2Original width guides
3Original eject table
4Document processor cover
5Original loaded indicator
6Cleaning cloth compartment
NOTE: Original loaded indicator shows the state of the originals.
When upper indicator is lit green: The original is set.
When upper indicator blinks green: Reset the original.
When lower indicator blinks red: The original is jammed. Refer to Clearing Paper Jams on
page 6-15.
How to Load Originals
Follow these steps to load originals in the document processor.
Item Specifications
Weight 1-sided original: 45 g/m2 - 160 g/m2
2-sided original: 50 g/m2 - 120 g/m2
Size Maximum 11× 17"/A3 - Minimum 5 1/2 ×81/2"/A5R
Capacity Standard paper (80g/m2, 11 × 8 1/2"/A4 or smaller), color paper (11× 8 1/2"/A4
or smaller), recycled paper (11× 8 1/2"/A4 or smaller): 100 sheets or less
(Auto Selection Mode: 30 sheets)
Standard paper (80g/m2, 8 1/2 × 14"/B4 or larger), color paper (8 1/2 × 14"/B4
or larger), recycled paper (81/2 × 14"/B4 or larger): 70 sheets or less
Art paper: 1 sheet

123

5

46