4.Here, the “Graph” symbol shows that the trend display for the wind direction has been selected in the history field. It only appears if it has previously been selected (see 3.2.6.:“History”). The trend can be displayed in km/h, m/s, mph or knots. However, if Beaufort or degrees have been chosen for the main display, any trend available will be shown in km/h.

Key functions (Allocation of touch screen fields, see page 9)

-Touch screen field 7 switches over between the units for wind speed and the display of numerical wind direction. The switching sequence is: km/h, m/s, mph, knots, Beaufort, numerical value of wind direction in degrees.

3.2.3.Rainfall measurement (fields 8/9)

The display field for the rainfall measurement is situated in the middle at the top.

Here, the amount of rain collected in the rainfall sensor and the current rainfall (rainfall in the last quarter of an hour) are displayed.

2 3

2 3

3

1

1

1

1.The rainfall is either displayed as a total (“total”; since the last deletion), the last hour (“1h”), the last day (“24h”) or the current day (“current 24h”).

The following particular features should be noted:

The rainfall for the “last hour ” is always calculated on the half hour, e.g. between 14:30 and 15:30. The rainfall for the “last day” is always calculated at 7:30.

The rainfall for the “current hour/day” is calculated from the accumulated stored values for the “last hour/day”. As a result of internal checking functions, the display of the rainfall is delayed by between 3 and 12 minutes.

2.Umbrella symbol: shows current rain, i.e. if the rainfall sensor has reported an amount of rain within the last 15 minutes, which is above the trigger point for the rainfall sensor.

3.Here, the “Graph ” symbol shows that the trend display for the rainfall has been selected in the history field. It only appears if it has previously been selected (see 3.2.6.: “History”).

Key functions (Allocation of touch screen fields, see page 9)

-Touch screen fields 8 and 9 switch over the display mode. The switching sequence is:

Total, current hour, last hour, current day, last day.

-If touch screen field 26 (“RESET”) is pressed briefly, the point in time at which the total rainfall data were last deleted will be displayed in the date and time field.

-If touch screen field 26 (“RESET”) is pressed for 3 seconds, the total rainfall value will be deleted.

3.2.4.Air pressure measurement (fields 10/11)

The display field for the air pressure measurement is situated in the middle at the top right hand side (“AIR PRESSURE”). Here, the current air pressure at the location of the weather station is displayed with one of three possible units.

2

3

2

3

2

3

1

1

1

 

 

1.Depending on the setting in the configuration mode, the air pressure is displayed in hPa, mmHg or inHg.

2.Either the relative air pressure (value corrected for height, see corresponding setting in configuration mode and the explanation in the section “Explanation of terms”) or the absolute air pressure (the uncorrected output value from the sensor, right hand diagram) can be displayed.

17

Page 16 Page 18
Page 17
Image 17
La Crosse Technology WS-2510 manual Rainfall measurement fields 8/9, Air pressure measurement fields 10/11
Page 16 Page 18

WS-2510 specifications

The La Crosse Technology WS-2510 is a versatile weather station designed for those who want to keep an eye on environmental conditions from the comfort of their own homes. With its sleek design and user-friendly interface, the WS-2510 provides a wealth of data about local weather conditions at a glance.

One of the primary features of the WS-2510 is its accurate and reliable weather monitoring capabilities. The station measures indoor and outdoor temperatures, humidity levels, wind speed, and rainfall. This comprehensive monitoring system allows users to gain valuable insights into current weather patterns, making it easier to plan outdoor activities or simply understand changing climatic conditions.

Equipped with wireless technology, the WS-2510 transmits data from the outdoor sensor to the indoor display unit without the need for messy cables, allowing for easy installation and positioning of the sensor. This feature enhances the convenience of real-time monitoring, as users can place the outdoor unit in the optimal location for accurate readings.

The WS-2510 is also notable for its multifunctional display. The indoor console features a large, easy-to-read LCD screen that showcases critical weather information in a clear format. Moreover, it includes trend indicators that display historical data, helping users track changes over time. The display updates frequently, ensuring that the information presented is current and useful.

In terms of technology, the WS-2510 utilizes advanced sensors for temperature, humidity, and wind measurements, ensuring high accuracy. It also uses a robust wireless communication protocol that provides a reliable connection between the outdoor and indoor units.

Another attractive feature of the WS-2510 is its ability to store data over time. Users can review past weather conditions, which is especially beneficial for those interested in tracking patterns, such as seasonal changes or anomalies. The data storage function allows for a more nuanced understanding of local climate trends.

For enthusiasts and professionals alike, the La Crosse Technology WS-2510 provides a cost-effective, reliable solution for weather monitoring. Its blend of advanced technology, user-friendly features, and sleek design makes it an appealing choice for anyone looking to bring the power of meteorological data into their home. With the WS-2510, monitoring local weather has never been easier or more engaging.
Top Page Image Contents