3.4.2.Setting/Resetting the MIN/MAX alarm values
-After activating one of the alarm value displays (MIN or MAX), touch the value field for which the alarm value is to be set.
-The value will flash and the lower control field will change to the following form:
-The flashing value can be adjusted using the “-” and “+” touch screen fields. It is possible to run through the display more quickly by pressing the relevant touch screen field for longer.
-If the “RESET” key is pressed while in this input mode, the alarm value will be deleted.
-Pressing the “END” key terminates the input and stores the value.
-The values for the alarms cover the ranges:
- | Temperature: | -29.9ºC to 49.9ºC |
- | | -21.8ºF to 121.8ºF |
- | Humidity: | 20 %to 99 % |
- | Wind speed: | 0.0 km/h to 149 km/h |
| | 0.0 m/s to 41.9 m/s |
| | 0.0 mph to 92.9 mph |
| | 0.0 kn to 80.9 kn |
- | Air pressure: | 700 hPa to 1099 hPa |
| | 525 mmHg to 824 mmHg |
20.65inHg to 32.42 inHg
3.4.3.Setting the wake-up times
Please note!
The wake-up time including the associated day can only be edited in the MAX alarm value display.
-The day for which the wake-up function is to be set can be set using the “DAY” field (field 27). The display “--” means that the wake-up time set applies to all 7 days of the week (daily wake-up time).
-Pressing touch screen field 21 activates the wake-up time (alarm symbol appears)or deactivates the wake-up time (alarm symbol is crossed out).
-To set the wake-up time, after setting the required day, press touch screen field 20, the time will start to flash and can be adjusted using the “-” or “+” touch screen fields. It is possible to run through the display more quickly by pressing this touch screen field for longer.
The following examples illustrate how the wake-up time is set and a deactivated and an activated wake-up time.
Daily wake-up time 6:30,deactivated | Wake-up Monday 7:00,activated |
-You can store the wake-up time setting by pressing the “END” key.
23
