La Crosse Technology WS-2510 Example for the display of minimum values, Display min/max values

Example for the display of minimum values.

Display min/max values

-The display mode is selected by touching the appropriate field “MAX” (field 27) or “MIN” (field 25). The particular touch screen field activated (MIN or MAX) will be faded out. Both titles are only visible in normal display mode.

-If the touch screen field for a value is then pressed, the time of the occurrence associated with this value will be displayed in the time/date field (20/21) for 10s.

-If the touch screen field is pressed again while the time is being displayed, the display mode for the value concerned will be stepped forwards.

Indoor sensor: Temperature -> Dewpoint ->

Outdoor sensor: Temperature -> Dewpoint -> Perceived temperature ->

The outdoor sensors are selected using touch screen fields 4 or 5 as with the normal display. Wind sensor: Wind speed: km/h ->m/s ->mph ->knots ->Beaufort ->

Rain sensor: Amount per day/hour: 24 h ->1 h ->

-You can return to the normal display by pressing the “END ” key.

Deleting min/max values

-If the “RESET” field is pressed while the time of the minimum or maximum values is being displayed, the value concerned will be deleted.

-If the “RESET” field is pressed for 3 seconds, all the stored values will be deleted.

History display for min/max values

-By using the SELECT function (touch screen field 16) and then selecting the revaluation, the minimum/maximum trends of the individual values can also be checked depending on the previous choice of the min/max function (see also the section “History”).

Please note!

-If not exited manually by pressing the “END” key, the min/max display will be terminated automatically 2 minutes after the last key has been pressed and the unit will revert to normal display mode.

-Only the maximum value display is available for the rain and wind sensor.

-In the case of the rain sensor, the display modes for the maximum value display are adapted as follows: Total: ->maximum value that occurred in the last 24h

Current 24h -> maximum value that occurred in the last 24h 24h -> maximum value that occurred in the last 24 h Current hour -> maximum value that occurred in the last hour 1h -> maximum value that occurred in the last hour

-In the case of the hours of sunshine, the “h/day” display mode is always set.

-In the case of the wind speed display, the wind direction associated with the maximum value that occurred will also be displayed concurrently.

21