Panasonic SV-AS3 Question Answer, Clock is not set, Correctly, Retouch, Software does not

Q (Question)	A (Answer)
	If you do not use this unit for a long period of time,
The clock is not set	the clock may be reset. When the screen of clock
correctly.	setting appears, set the clock again.
	If you record pictures without the clock setting, the
	date is recorded as [1/1/2000 0:00].
The retouch	If both SD Viewer supplied with this unit and
software does not	SD Viewer Ver. 2.1E supplied with SD Multi Camera
start even if retouch	SV-AS10 are installed in the PC and uninstall either
files (extension	of them, the association of retouch files with
“.ped”) are clicked	SD Viewer will be disabled. In this case, uninstall
on Windows	both versions of SD Viewer and then install the one
Explorer etc.	you want to use again.
	Did you insert an NTFS-formatted Memory Card
When this unit is	into this unit? In this case, log on with [Administrator
connected to the	(computer administrator)] (or any other user name
PC, the Card	having equivalent rights), right-click the Removable
Access Lamp	Disk icon in [My Computer], and select [Remove].
keeps blinking.	Check that the Card Access Lamp is lit and then
	cancel the connection between this unit and the PC.
	1 Click [Next].
	2 Confirm whether your device is configured to the
[Found New	optimal driver detection setting and click [Next].
	3 Insert the supplied CD-ROM into the CD-ROM
Hardware Wizard]
	drive.
appears though this
	4 Enter the path as “D:\USB Driver\files” (example
unit is connected to
the PC after the	of D drive assigned as CD-ROM drive).
	5 Click [Next].
USB driver is
	6 Click [Next].
properly installed.
	7 Click [Finish].
	After the procedure above, follow the wizard to
	install the hardware.

99

VQT0Q47