Accessing PC indication | Panasonic SV-AS3 specs

3

1

Connect this unit to the power plug with the AC adaptor 1 and the AC mains lead.

4		Connect this unit to the PC
4		with the supplied USB cable
		with the supplied USB cable
		2.
		– [ACCESSING PC] indication
	2	appears.
	2	• If the [ACCESSING PICTBRIDGE/
		• If the [ACCESSING PICTBRIDGE/
		PTP] indication is displayed, once
		disconnect the USB cable and
		then confirm the setting in Step 2.

≥Do not disconnect the USB cable or the AC adaptor from this unit, or do not remove the card while the Card Access Lamp on this unit is blinking. The software may not be properly operated or the data being transferred may be damaged.

≥Do not use any other USB cables except the supplied one.

≥Do not disconnect the AC adaptor while connecting to the PC.

≥When the PC connection mode on this unit (displayed as [ACCESSING PC]) is not cancelled even if you turn the PC off, disconnect the USB cable.

≥If the PC is in the power saving mode while connecting to this unit, the PC may not recognise this unit when recovering from the power saving mode. In this case, restart the PC after you disconnect this unit. (When you connect this unit to the PC and use it for a long time, cancel the setting in the power saving mode beforehand.)

73

VQT0Q47

Image 73

Panasonic SV-AS3 operating instructions Accessing PC indication

Contents

Operating Instructions Contents Specifications Connecting to PC OthersEnd User License Agreement 100 Preparation Information for Your Safety VQT0Q47 Dear Customer Introduction 357,594 297 SD Memory Card is not included Battery Pack AccessoriesUSB cable Cleaning Cloth AC adaptor Hand strap Suitable Card Optional AccessoryAbout SD Memory Card optional Body Controls Layout Battery Lock Open P12 21 22 Remote Controller P27Stereo Earphones P60 Card Slot P13 Open the Card/Battery Door at the bottom of this unit Inserting/Removing the Battery or the CardInsert/remove the battery or the card Close the Card/Battery Door When removing the card/battery When inserting the card/batteryConfirm the direction of the battery and the card Label Notch Charging the Battery Charging time Environment for chargingNumber Continuous Power/Charge/Card Access Lamp Slide the Power Switch to onTurning This Unit On Blinking Switching the Mode Battery indicatorSlide the Record/Playback Mode Switch to the desired mode Press the Jog Ball to set How To Set the MenuPress the Menu button Sub-menu screen appears Setting on the operation sound Setup MenuSetting on the Jog Ball Setting on the LCD Monitor Setting on the USB connectionSetting on the power Restoring the settings Setting on the clockSetting the Clock Formatting initialising the card Press the Menu button after adjusting the date and time Adjust the date and time with the Jog Ball Shortcut Menu Flash P34 Slide show P52 Night mode P3811 12 13 Dpof print P56 Before Recording How to hold the SD Multi Camera Recording mode Recommendable situation Audio Picture Slide the Record/Playback Mode Switch to the recording modeRecording Voice Press the Shutter button to stop When selecting Picture Tap the Shutter button for recording When recording in MPEG4 mode When recording in Picture modeWhen recording in Voice mode Approximate Number of Recordable Pictures and Time ≥ The time listed above tables are approximate Size and quality of the image recorded in MPEG4 Changing the Picture Size and QualityQuality 2016a 1512 1600a 1200 1280a 960 640a 480 Recording Press the Jog Ball Enlarging Pictures Digital ZoomRoll the Jog Ball up or down to set Zoom magnification Flash Setting the FlashAuto ≥ The flash cannot be activated in the following cases Flash is not activated Self timer Recording with the Self-timerPress the Shutter button to take a Picture Setting in the set mode Adjusting the Colour to Natural Tone White Balance Night mode Recording in Dark Places Night Mode Compensating the Exposure Manual adjustmentRoll the Jog Ball left or right to compensate the exposure Press the Jog Ball to set the exposure Sensitivity Setting the ISO SensitivityDark places Playback Slide the Record/Playback Mode Switch to the playback modePlayback modes Playable files Audio Still picture Press the Jog Ball to start playback When selecting MPEG4 or VoicePress the Jog Ball to pause playback When playing in Voice mode Pictures Multi Playback Thumbnail Display Adjusting Volume Deleting Files Playing Motion Images Repeatedly Repeat PlaybackRepeat One Press the Menu button to exit this setting When you release protection Preventing Accidental Erasure of Files Lock SettingWhen you release protections on all files Select the files to be protected Roll the Jog Ball up or down to select Enlarging Pictures Target ZoomZoom magnification and then When you cancel registration When you play files registered as Favourite onlyRegistering Still Pictures as Favourite Select the desired picture and then Creating a Slide Show with Audio Playback When you cancel registration on all filesRoll the Jog Ball left or right to select Pictures to create a slide show Select the audio file you want to play When you select Yes in StepDuring the slide show and then press Jog Ball ¿ mark Playing Still Pictures on the Slide Show Connect this unit and the printer with AC adaptor and AC mains leadSupplied USB cable Change Changes the print Settings To change the print settingPlayback Select a picture and then press Jog Ball Start Print start Print starts Messages displayed When the AC adaptor is not connected When the battery is not insertedWhen the AC adaptor is unplugged during When connecting in the recording mode When you confirm pictures with Dpof setting Only when Single print is selectedDesired file When you cancel Dpof setting Playback When you print the date in Dpof printing Audio File Playing Music Insert a card which includes audio files Connect the remote controller and the stereo earphones Play music Desired music file To prevent operation mistakes on this unit When you switch the sound quality ≥ Music files cannot be recorded or deleted on this unit Selecting Playlists Playing Repeatedly Repeat Playback Operating environment for USB connection Operating Environment of the SoftwareOperating environment of the software Sound Connecting to PC VQT0Q47 When you install SD Viewer Before Connecting to a PC for the First Time InstallationStart the PC and insert the CD-ROM supplied Installing SD Viewer Installing the USB Driver Click I agree Installing SD-Jukebox Playback mode Connecting to a PCTurn this unit on and set to Be sure to insert the charged Accessing PC indication Depending on the PC used Checking that This Unit Is Properly Recognised by Disconnecting the USB Cable Safely Folder name File name example Folder Structure of the Card Used for This Unit Playing Copied Files Picture MPEG4 Using Files in a Card on a PC Picture MPEG4 File type Software used for playing files Windows Macintosh Using SD Viewer Closing SD Viewer Select FileExit ≥ Using SD Viewer Using SD-Jukebox Reading Operating Instructions of the Software Closing SD-Jukebox Uninstalling the Software This Unit ≥ Be sure to use the supplied AC adaptor AC Adaptor Bring spare batteries when you use this unit outdoors Battery Do not throw unnecessary expired batteries into a fire Charging Error Condensation When the charge lamp turns offCauses of condensation LCD Monitor When condensation has taken place Recorded Files CardBe sure to remove and store the card after use Format Demonstration Mode Screen Display in Recording 3 4 5 6 7 Screen Display10 11 12 13 14 Screen Display on the Thumbnail Screen 10 11 12 Screen Display in PlaybackScreen Display in Playing Music Messages Countermeasures Messages Trouble Shooting Q&A Take time to record onto a card depending on Question Answer Colour or BrightnessRecord onto a card Recording stops Balance may not be properly adjusted even if When you record pictures with the flash, the whiteProperly adjusted when the flash light does not Question Answer Flash cannot be With printers PicturesSupporting PictBridge Access Lamp When this unit isProperly installed Question Answer SD Multi Camera Specifications AC adaptor Battery pack Memo Article Restrictions on Copying the Software Article 1 License Article 2 Use by a Third PartyArticle 4 Computer Article VQT0Q47