La Crosse Technology WS-9025U Positioning The Thermo-Hygrosensor, Care And Maintenance

1.The distance of the Weather Projection Station or sensor should be at least 6 feet (2 meters) away from any interfering sources such as computer monitors or TV sets.

2.Avoid placing the Thermo-hygro sensor onto or in the immediate proximity of metal window frames.

3.Using other electrical products such as headphones or speakers operating on the 433MHz-signal frequency may prevent correct signal transmission or reception. Neighbors using electrical devices operating on the 433MHz-signal frequency can also cause interference.

Note:

When the 433 MHz signal is received correctly, do not re-open the battery cover of either the sensor or Weather Projection Station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see “Setting up” above) otherwise transmission problems may occur.

The transmission range is around 65-82 feet (20-25 meters) from the sensor to the Weather Projection Station (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see “Setting up” above).

POSITIONING THE THERMO-HYGRO SENSOR:

Each sensor is supplied with 2 wall mounting screws and plastic anchors. To wall mount simply:

1. Secure the wall base onto a desired wall using the screws and plastic anchors.

2. Insert the sensor to the wall base.

Note:

Before permanently fixing the sensor wall base, pace all units in the desired locations to check that the outdoor temperature and humidity readings are receivable. In event that the signal is not received, relocate the sensors or move them slightly as this may help the signal reception.

CARE AND MAINTENANCE:

•Extreme temperatures, vibration and shock should be avoided as these may cause damage to the units and give inaccurate forecasts and readings.

•When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings.