MANUAL TIME SETTING:
In case the Weather Projection Station cannot detect the
Hour flashing
Minutes flashing
1.The hour digit will start flashing.
2.Use the CH/+ key to set the hour.
3.Press again the SET key to set the minutes. The minute digits start flashing.
4.Use the CH/+ key to set the minutes.
5.Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try to receive the signal between 12:00 to 6:00 a.m. every day despite it being manually set and if the WWVB time reception function has been set ON. When it does receive the signal, it will change the manually set time into the received time. During reception attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB tower icon will not appear but reception will still be attempted the following hour.
CALENDAR SETTING:
Date and month (24hr time format)
Month and date (12hr time format)
Year
The date default of the Weather Projection Station is 1. 1. in the year 2003. Once the
1.The year starts flashing.
2.Use the CH/+ key to set the year (between year
3.Press the SET key again to confirm and to enter the month setting. The month starts flashing.
4.Use the CH/+ key to set the month.
5.Press the SET key again to confirm and to enter the date setting mode. The date starts flashing.
6.Use the CH/+ key to set the date.
7.Confirm all calendar settings with the SET key and enter the Snooze setting.