Muratec Fax Machine Turning the department code setting on and off, Select the department mode

Turning the department code setting on and off

	N.Department Codes
1 Press MENU, [Mach Set], N.	Use cursor	to select�
	ON or OFF.

Common settings

Select the department mode

You can select the mode, department code (four-digit number) or department ID (ten characters or numbers), which you will enter before sending a fax or making a copy.

2		ON
	Press [Setting].	OFF

Note: If department code operation is pro- tected (see below), the fax beeps briefly

and then returns to standby mode. You Enter will have to turn off the protection first, then repeat this step.

3 Select desired setting.

4 Press [Enter].

Turning department code protection on and off

Important: This feature will work only if you’ve activated the passcode protection (see page 3.61).

1 Press MENU, [Mach Set], N, NEXT, NEXT. 2 Press [Mode].

3 Select desired setting.

4 Press [Enter] to save the setting.

Machine Settings

Use cursor to select

� item.

M�.EnergySave ReleaseTime

N.Department Codes

� �

�Mode

N.Department Codes

Use cursor to select

�item.

Department� Code Department ID

��

�Enter

Getting Started

1 Press MENU, [Mach Set], N, NEXT.

2 Press [Protect].

3 Use the numeric keypad to enter the four-digit passcode.

4 Press [Enter].

5 Select desired setting.

6 Press [Enter] to save the setting.

N.Department Codes

Enter protect passcode.�

****

Enter

N.Department Codes

Use cursor to select� ON or OFF.

ON

OFF

Common Settings

Enter

4.13