Muratec Fax Machine Accessing the default copy setting mode, Erase border setting

Accessing the default copy setting mode

You can change or set the machine’s default copy settings.

Note: Regarding the changing of the fax settings, see pages 3.69–3.76.

Note: Regarding the changing of the machine settings, see pages 4.6–4.16. To access the copy settings:

1	Press MENU.
2	Press [Copy Set].
		Copy Settings
		Use cursor to select�
		item.
		A.Erase Border Setting
		B.Erase Center Setting
		C.Margin Setting
		D.Sort Setting
		E.User Settings
		Enter
3	Select the desired settings using the cursor key, and then press [Enter].
4	Change the settings to your preference.
5	Then, press [Exit] to save the setting.

Copy settings

A. Erase border setting

Default setting: OFF, Erased margin: Left and Right 0.2″ , Top and Bottom 0.2″

The default setting of the erased margins in the erase border function can be changed within 0.2 – 2.0 inches in 0.1 inch steps.

1		Erase Border Setting
	Press MENU, [Copy Set].	Use cursor to select�
		item.	: OFF
2	Select “A.Erase Border Setting” and then	Erase Border
		Default	: T & B		0.2"
	press [Enter].			R & L	0.2"
		Exit		Enter
						Features
		Use cursor to select�
3		Erase Border Setting
	To change the default setting of Erase Border,	item.				Copy
	select “Erase Border” then press [Enter].	ON
4
	Select “ON” or “OFF” then press [Enter] to	OFF
	save the setting.
				Enter
5		Erase Border Setting
	If you want to change the default value of	Move cursor and enter�
		value.	(0.2-2.0)
	erased margin, select “Default” then press
	[Enter].	Document
6		R&L		T&B
	Enter desired value, then press [Enter].	0.2"	0.2"
7	Press [Exit] or RESET to save the default set-	Default Enter
	ting.

Note: Press RESET to return to standby.

Note: If you set the default setting to ON, the Erase Border icon will be appeared on the LCD.

2.25