Muratec Fax Machine Programming a broadcast / group, Tone, Delayed Tx Enter Trnsmit Time, 1705

Delayed Tx

Enter Trnsmit Time� 30/17:05

7 Next, tell your fax to carry out this delayed command one of these ways:

Programming a broadcast / group

Programming a broadcast is very similar to programming a delayed transmission. But instead of sending to just one phone number, you set up multiple numbers for the transmission.

To program a broadcast / group into a programmable one-touch key:

Advanced fax

6 If you want the broadcast to begin immediately every time you press the key, press [Exit] and skip to step 9.

If you want to delay the broadcast, select “Delayed Tx” and press [Enter].

1 Press MENU, C, [Enter].

The LCD shows the programmable one-touch number list.

2 Select the programmable one-touch number that you want to program or change.

C.Prog.One-Touch

Select p-one-touch.(79-84)

79:

80:

81:

82: 83:

Detail Erase Enter

Option 1: Perform the command once at a certain time on a certain day of the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the

numeric keypad to enter the dateClear Enter and time when the fax should perform the command.

Started

Note: If you’re changing a previously stored command:

If your previous command for this key was a broadcast / group trans- mission and you want to keep this key programmed for a broadcast / group transmission, use these instructions to make changes.

If you want to assign this key to a completely different operation, overwrite a previously stored command to the new one.

3 Press [Enter].

4		79:
	Use the numeric keypad to enter up to 330 fax	Enter fax number.�
		_
	numbers — you can use any combination of call
		123-4567
	groups, one-touch keys, speed-dial numbers and	01:AABBCC
	manually-dialed numbers.	S001:BBCCDD
		G01

To add more fax numbers, press [Broadcas]
between each one. If [Broadcas] is not appeared	Tone	Pause Broadcas
on the LCD, press NEXT until it appears.

To enter a speed-dial number, press SPEED DIAL/TEL INDEX and the number’s three-digit identifier.

To enter a call group, press [Group] and the group’s identifier number. If [Group] is not appeared on the LCD, press NEXT until it appears.

Note: If you enter characters by mistake, press [Clear] to erase them. Or press or of the cursor key to select the number then press [Clear].

5 Press [Enter].

Option 2: Perform the command at a cer-	Delayed Tx
		Enter Trnsmit Time�
tain time each day you press the	0	0/17:05
key. (For example, “Do this at 5:05
PM today.”)
To select this option, use the
numeric keypad to enter 0, 0 and		Clear	Enter
then the time the fax should per-

form the command.

8 Press [Enter], [Exit].

9 The machine will return to step 2.

Note: When the delayed transmission is programmed, the symbol will appear in the programmable one-touch number list on the LCD.

If you want to enter or change another key’s programming, repeat steps 2-9. If you do not want to enter or change any other key’s programming, press RESET. Your machine returns to standby mode.

Fax Features Getting

3.55