Muratec Fax Machine Settings for operation, Adjust the monitor speaker’s volume, Fax Panel Reset

Fax settings

Settings for operation

Adjust the monitor speaker’s volume

Default setting: Medium.

You can set the volume of the monitor speaker, assuring that on-hook dialing will be as loud (or as soft) as you require.

1	Press MONITOR/CALL on the control panel. You now should hear a dial tone.
	Important: If you don’t hear a dial tone, make sure your fax machine is
	plugged into a working phone line.
2	If the volume you hear is satisfactory, skip to step 4.
	Otherwise, proceed to step 3.
3		Tel Mode
	Adjust the volume as you wish:	Use cursor to adjust�
		monitor volume.

Printing your fax settings

After you’ve programmed settings into your machine, print a fax settings list. We recommend this, particularly if you’re sharing the machine with other users, who might change the settings.

With this list, you can quickly confirm that all of your settings are correct, without having to go back and check them on the machine. Or, if you do need to undo someone else’s changes, this list guides you in returning the machine to your preferred settings.

Note: Please refer to the index at the end of these instructions to locate any settings you don’t recognize or understand.

To print the settings list:

1 If the machine is in Fax mode, proceed to step 2.

If it is in Copy mode, press FAX to change to Fax mode.

To turn the volume up, press .

To turns the volume down, press .

The LCD indicates the volume.

4 Press MONITOR/CALL again to hang up.

Volume Setting
OFF	Low Medium	Loud
-----------------------
<-	->	Enter

2 Press MENU, J, [List].

Printing a program list

Panel auto reset time

Note: Default: After three minutes

The machine returns to its initial condition automatically after a certain period of time. You can change this time from 1 to 10 minutes.

Note: The machine first resets the LCD display, and after certain period of time it resets the key settings to the initial condition.

1	Press MENU, J, 1, 7, [Enter].
2		17.Fax Panel Reset
	Enter the time to auto resetting, and then	Fax Panel Reset			(1-10)
		After	0	3 min.
	press [Enter] to save the setting.
3		Fax Panel Reset : 3 min.
	Press RESET to return to standby.

Enter

Your machine can also print a program list. This lists the functions available on your fax machine and the keystrokes needed to complete them.

Note: Please refer to the index at the end of these instructions to locate any settings you don’t recognize or understand.

To print a program list, press MENU, *, 8.

3.76