Muratec Fax Machine installation manual Combine, Pages 1 sheet Pages -- 1 sheet, Line

Advanced Copy

Combine

You can copy 2, 4 or 8 pages of your documents into one sheet.

To copy with combining: 1 Press MENU.

2 Select “Combine” using the cursor key, and then press [Enter]. Note: The Auto Reduce/Enlarge is selected automatically.

2 pages > 1 sheet-- 4 pages > 1 sheet--

8 pages --> 1 sheet

3 Select the desired combination modes using the cursor key.

Note: The number of documents combined can be 2, 4 or 8.

4 If you want to change the recording paper size for combining, proceed to next step. Otherwise, skip to step 6.

Combine

Select # of document. Ratio:Auto

# of doc 2 4 8 Paper Letter

Paper Cancel Enter

	2		4		6		8
2		4		6		8
	1		3		5		7
1			3		5		7

Note: If you select the 2 in 1 or 8 in 1, you should set your document with the dif- ferent direction from the direction of recording paper you selected.

If you select the 4 in 1, you should set your document with the same direc- tion from the direction of recording paper you selected.

Note: You can print a separator line between copied images.

Note: In this mode, the reduce/enlarge ratio will be set to “Auto” (automatically). If you want to set the reduction/enlargement ratio manually, set the ratio

5	Press [Paper] to select the paper size, and then press [Enter].
6	You can insert the separator lines between combined images. If you want to
	insert the separator lines, proceed to next step. Otherwise, skip to step 8.
			Combine
7	Press NEXT and then press [Line] to print the		Select # of document.
				Ratio:Auto
	separator lines. To cancel the separator lines,				# of doc
	press [Line] again.
					2	4 8
	Note: The width of the line can be changed.					Paper
	(See page 2.28.)				Letter
				Position		Line
8		Layout
	If you want to arrange the position of the each
	document, proceed to next step. Otherwise, skip to step 12.

after setting the combine function.

Note: According to the size of document and recording paper you selected, a part of the image might be lacked.

Note: If the number of the documents you set was less than document pages you selected for combining, the last page(s) will be copied blank.

Note: The machine cannot copy your documents different in size and direction. Make sure the document are set to same direction shown on the LCD.

9 Press [Position], the LCD will show:

Note: If [Position] does not appear on the LCD, press NEXT.

10 Select the position using the cursor key and enter the number of the document you want to change using the numeric keypad.

Combine

Move cursor and enter� page # using num. key.

Again Enter

Note: You cannot use this function with the duplex function.

Note: The number which was on the position you selected will change places with the number you entered.

Note: If you want to reset to the initial position setting, press [Again].

11 Press [Enter] to save the setting.

2.10