Muratec Fax Machine EasyStart Initial setting, Clearing stored settings, Getting started

EasyStart (Initial setting)

EasyStart software is already installed on your Muratec machine. It guides you through the process of entering your machine’s settings.

Remember that the settings you make here can always be changed later.

Clearing stored settings

Before using EasyStart, clear your machine’s built-in user data memory. This ensures the memory will hold only your settings.

Important: After you use EasyStart, do not clear the memory again unless an authorized technician asks you to do so.

To clear the machine’s memory:

		User data clear
	Press MENU, *, 2. The LCD now asks if you want	�Check
1 to clear the memory.
	Note: If you don’t want to clear the memory,
	just press [Cancel].
2	If you do want to clear the memory, press	Cancel Enter
	[Enter].

Getting started

Getting started
		Started
Determine the following before you go any further:
1	The type of dialing your telephone system requires — Choose either tone or	Getting
	pulse (rotary) dialing.
2	The name and fax number you want to appear on your faxes —
	Every fax page you send arrives at the receiving machine with a single line of

text at the very top of the page. This text lists a name and a fax number, which are called a Transmit Terminal Identifier (TTI). The TTI cannot be longer than 22 characters.

Entering initial settings

Important: If you press RESET during EasyStart, your machine returns to standby mode (its normal condition). But it will keep the settings you saved by pressing [Enter] as described in these instructions.

1 Press FAX to change to Fax mode, if the machine is in Copy mode.

2 Press MENU, [Fax Set], I, [Enter].

The LCD shows the current calendar/clock setting, with a cursor appearing under the first digit.

Language settings

English is the language your machine initially displays on the LCD and uses to print reports. But you can set it to “speak” French or Spanish, too.

As you give the order for the machine to change languages, it “rolls” from English to French to Spanish, and then back to English.

To make the change from one language to the next, press MENU, #.

3 Use the numeric keypad to enter the correct date and time, using a 24-hourformat for the time. For instance, to set 1:30 PM on November 26, 2001, press 2 0 0 1 1 1 2 6 1 3 3 0.

Note: Your machine automatically inserts the spaces and date-slash. All you have to do is enter the digits.

I.User Install Enter current time. 2001 11/26 13:30

Enter

To change a digit, press the cursor key to move the cursor. Then enter the cor- rect digit.

1.17