Muratec Fax Machine installation manual 1Muratec

Getting started

4	Press [Enter] to save the clock setting and continue EasyStart.
		I.User Install
5	The LCD now asks if you want to set the calen-	Set Daylight saving
		ON or OFF.
	dar/clock to automatically	ON
		OFF
	recognize daylight saving time (DST).
		�
	When the setting is On, your machine automati-
	cally recognizes DST at 2 AM on the appropriate	▲	▼	Enter
	switchover Sundays each year.
	When the setting is Off, no automatic change will occur.
6	Select On or Off using the cursor key.
7	Press [Enter] to save the setting and continue.
		I.User Install
8	The LCD now asks you to enter your fax number	Enter your fax number.
		123-456-7890＿�
	as you want it to appear on other fax machines’

		I.User Install
14	The LCD now asks you to enter the name you	TTI 1	Upper case
		Muratec＿�
		TTI 1
	want to appear at the top of faxes you send.		:
	The name may be up to 22 characters in length.	TTI 2	:
		TTI 3	:
	Select TTI 1, 2 or 3 using the cursor key. Then	�
	press [Enter].	�
		Chara.	Clear	Enter
15	Use the one-touch keys to enter letters and
	other non-numeric characters. Regarding entering characters, see page 1.15.
	Note: If you make a mistake, press [Clear] to erase to the left.
	To change just one character in the name, move the cursor by cursor
	key. Press [Clear] to erase the character. Then re-enter the character
	correctly.
16	Press [Enter] to save the setting.
	If you do want to set or change another TTI, go back to step 14.

If you do not want to set or change any other TTI, press [Exit].

displays or printouts. The fax industry term for this number is Subscriber ID.

Use the numeric keypad to enter the fax num-
9 ber. To insert a dash, as shown here, press [ – ].	-	Clear	Enter

The number may contain up to 20 characters (numbers and dashes).

Note: If you make a mistake, press [Clear] to erase to the left.

To change just one number, move the cursor by cursor key. Press [Clear] to erase the number. Then re-enter the fax number correctly.

10	Press [Enter] to save the number and continue.
		I.User Install
11	The LCD now asks you to set the type of dialing	Use cursor to select
		dialing	type.
	needed for the machine, either tone or pulse.	Tone
12		Pulse
	Select the type of dialing using the cursor key.
13	Press [Enter] to save the setting and continue.	▲	▼	Enter

17 The LCD now asks you to set the usual TTI. Select the TTI you want to appear usually on faxes you send using the cursor key.

18 Press [Enter] to save the setting and continue.

19	The LCD now asks you to set the reception
	mode.
20	Select desired reception mode using the cursor
	key. (This setting can always be changed. We’ll
	discuss reception modes further on pages 3.7.)
21	Press [Enter] to save the setting. Your machine
	will return to standby mode.

I.User Install

Use cursor to select usual TTI.

1:Muratec

�

2:Muratec General dept. 3:Muratec Account dept.

�

�

▲	▼	Enter
I.User Install
Use	cursor to select
reception mode.
Fax Ready
Tel/Fax	Ready
Fax/Tel	Ready
Ans/Fax	Ready
Tel Ready
▲	▼	Enter

EasyStart is complete!

1.18