Muratec Fax Machine installation manual Basic procedure

Basic copy

Basic procedure

1	Make sure the machine is in the Copy mode. To change to the Copy mode,
	press COPY.
2	Press RESET to clear the previous setting, if necessary.
3	Set your document on ADF or FBS glass.
	Note: See “How to set the document” on page 1.19 for details.

4	Set any settings you want.
5	If you want to make only one copy of each page of the document, skip to step
	7. Otherwise, proceed to step 6.
6	Use the numeric keypad to enter the desired number of copies for each page
	in your document. You can set up to 99 copies.

Note: To change the number entered, overwrite it with new number.

7 Press START to begin the copying process.

Note: To stop the machine during multi-copying, press STOP.

Note: To return the machine to the initial condition after copying, press RESET.

Note: By default, your machine make a copy with the following conditions: Document type: Auto

Image contrast: Auto

Paper selection: Auto

Reduce/Enlarge ratio: 100%

Note: If you do not operate the machine for a certain period after copying, the machine returns to the initial display and after a certain period, it resets the any setting to the default. This is called “Auto Reset”. You can change the auto reset time. (See page 2.28.)

2.4