Muratec Fax Machine Erasing a programmable one-touch key, Code Polling, 79123-4567

9		F-Code Polling
	Use the numeric keypad to enter the appropri-	Enter password.�
		_
	ate ITU-Tpassword for the box.
		SubAddress	:123-4567
	Note: If there isn’t a ITU-Tpassword for this	Password	:
	box, skip to step 10.
10	Press [Enter].	Clear		Enter
11	If you want the F-Code polling to begin immedi-
	ately every time you press the key, press [Exit] and skip to step 14.

Advanced fax

Erasing a programmable one-touch key

1 Press MENU, C, [Enter].

The LCD shows the programmable one-touch number list.

2 Select the programmable one-touch key which you want to erase.

Note: You can select the programmable one-touch key by pressing that key on the control panel.

Note: You can press [Detail] to see the number which has been pro- grammed in that key.

If you want to delay the F-Code polling, select “Delayed Tx” and press
[Enter].
12 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a	Delayed Tx
		Enter Trnsmit Time�
certain time on a certain day of	3	0/17:05
the month. (For example, “Do this
at 5:05 PM on the 30th.”)
To select this option, use the

3 Press [Erase]. The LCD shows:

Important: If you want to quit without eras- ing the one-touch number you’ve selected, press [Cancel]. The fax will return to step 2.

4 Press [Erase] to erase the programmable one- touch number.

C.Prog.One-touch

OK to erase?

79:123-4567

80:

81:

82:

83: Cancel Erase

Getting Started

numeric keypad to enter the date	Clear	Enter
and time when the fax should

perform the command.

Delayed Tx

To erase another programmable one-touch number, repeat steps 2–4. Or press RESET to return to standby mode.

Features

Option 2: Perform the command at a cer- tain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should per- form the command.

Enter Trnsmit Time� 00/17:05

Clear Enter

Printing a list of your programmable one-touch keys

You fax machine can print a list of the commands you’ve stored in your programma- ble one-touch keys.

The list includes:

(1) each key’s one-touch number

(2) the fax/telephone number

(3) when the command should start

Fax

13 Press [Enter], [Exit].

14 The machine will return to step 2.

Note: When the F-Code transmission is programmed, the symbol will appear in the programmable one-touch number list on the LCD.

Note: When the delayed transmission is programmed, the symbol will appear in the programmable one-touch number list on the LCD.

If you want to enter or change another key’s programming, repeat steps 2-14. If you do not want to enter or change any other key’s programming, press RESET. Your machine returns to standby mode.

(4) which command you’ve selected

(5) if applicable, the selected call group(s) or F-Code box(es) you’ve stored in

the key

(6) the individual settings for each key

To print a list of programmable one-touch keys, press MENU, C, [List].

3.59