Muratec Fax Machine Last copy job, Using Last Job feature, Erase the document for Last Job

Last copy job

Your machine can hold the scanned data when you make a copy for a certain period. With this feature, you can make the same copy as the previous even when you do not have the original document.

Important: You must set the Last Job hold time in advance. (See page 2.28.)

If you want to set this feature Off, set 0 minute in the Last Job hold time setting.

Note: The machine holds only the last copy job in the memory.

Note: This feature will be not available in the following cases:

•When the power was turned off after making a copy

•When the Last Job hold time you set has passed (see page 2.28.)

•When the scanned data was erased (see the right column)

Using Last Job feature

1 Press MENU.

2 Select “Last Job” using the cursor key and then press [Enter].

					Advanced copy
Erase the document for Last Job
1	Press MENU.
2	Select “Last Job” using the cursor key and then press [Enter].
			Last Job		Set 1	�
3	Press [EraseDoc.].			Enter number of copies
		002 pages �
				and press START.
		are stored in memory.
					EraseDoc
							Features
			Last Job
4	The LCD will show:	OK to erase?
							Copy
		# of stored page :002
	Press [Yes] to erase it.
The machine will erase the document for the Last Job
in the memory.				Yes	No

3

4

Use the numeric keypad to enter the number of copies you want.

Note: To change the number entered, over- write it with new number.

Press START.

The machine will start to make copies.

Last JobSet 1

Enter number of copies� and press START.

002 pages �

are stored in memory.

EraseDoc

2.17