Fax settings

Memory transmission

Default setting: ON.

Your fax machine has a great memory! Take advantage of it, and you could:

Save Time. By using your fax machine’s memory, you won’t have to wait for your machine while it completes the transmission. Simply scan your document into your fax machine’s memory, and you can walk away with your original in hand.

Save Money. If you’re transmitting to another memory-equipped fax machine, your machine will send the document directly into the other machine’s memory and hang up. (The receiving machine then prints out your message from its memory after the call has ended.) This cuts your actual on-line time to a minimum.

Save Even More Money. Set up a delayed command (see page 3.25) to send your document after hours, and you can save more money, because the line charges will be cheaper.

The default transmission mode when the machine is turned on or when modes are cleared is memory transmission. You can change this setting, see below.

Note: Whether you decide to send your documents from memory or manually, you can override that choice one transmission at a time by pressing

MEMORY TRANSMIT before you send your document. After completing the communication, your fax will return to the default setting.

Note: Some documents use up memory more quickly than others. They include documents with many pages and those with many dark areas. When the machine’s memory is full, it can transmit only through the document feeder.

Note: When you use the flatbed scanner, the machine always uses memory trans- mission.

To change the default setting of memory transmission:

1

 

13.Memory Tx

Press MENU, J, 1, 3, [Enter].

Use cursor to select

 

ON or OFF.

2

Select desired setting using the cursor key.

ON

 

 

OFF

 

 

3

Press [Enter] to save the setting.

 

 

 

 

 

 

Enter

If the MEMORY TRANSMIT light glows, memory transmission is on.

If the MEMORY TRANSMIT light doesn’t glow, memory transmission is off.

Quick Memory transmission

Default setting: ON.

Using Quick Memory transmission can save you time over standard memory trans- missions.

For a normal memory transmission, your fax: (1) scans your entire document into memory, (2) dials the other fax machine, then (3) transmits the document.

But with Quick Memory transmission, your machine doesn’t wait to scan all pages into memory before dialing. After it scans the first page of your document, your machine dials the call. While dialing, connecting and transmitting, your fax machine continues to scan in the remaining pages of the document.

You can set your fax to always use Quick Memory transmission as the default.

Important: Your fax machine’s memory transmission feature must be turned on to use Quick Memory transmission (see left column).

To make Quick Memory transmission the default:

1

 

 

18.Quick Memory Tx

Press MENU, J, 1, 8, [Enter]. The LCD shows:

 

Use cursor to select

ON or OFF.

2

Select “On” using the cursor key.

ON

 

OFF

 

3

Press [Enter] to save the setting.

 

 

 

 

 

 

Enter

3.70

Page 122
Image 122
Muratec Fax Machine installation manual Quick Memory transmission, Quick Memory Tx