Muratec Fax Machine Programming F-Code polling, 12345678, Enter Trnsmit Time 00/1705 Clear Enter

Advanced fax

9		F-Code Tx
	Use the numeric keypad to enter the appropri-	Enter password.�
		_
	ate ITU-Tpassword for the box.
		SubAddress	:12345678
	Note: If there isn’t a ITU-Tpassword for this	Password	:
	box, skip to step 10.
10	Press [Enter].	Clear		Enter
11	If you want the F-Code transmission to begin
	immediately every time you press the key, press [Exit] and skip to step 14.

Programming F-Code polling

For this operation to work, three things must be true:

•The document which you’re polling must exist in the remote fax’s F-Code box (ITU-Tstandard sub-addressing/password box).

•You must know the remote fax’s ITU-Tsub-address and password (if any) for each box you want to poll.

To program an F-Code polling operating into a programmable one-touch key:

If you want to delay the F-Code transmission, select “Delayed Tx” and press
[Enter].
12 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a	Delayed Tx
		Enter Trnsmit Time�
certain time on a certain day of	3	0/17:05
the month. (For example, “Do this

1 Press MENU, C, [Enter].

The LCD shows the programmable one-touch number list.

2 Select the programmable one-touch number that you want to program or change.

C.Prog.One-Touch

Select p-one-touch.(79-84)

79:

80:

81:

82: 83:

Detail Erase Enter

at 5:05 PM on the 30th.”)
To select this option, use the
numeric keypad to enter the date	Clear	Enter
and time when the fax should

perform the command.

Delayed Tx

Note: If you’re changing a previously stored command:

If your previous command for this key was an F-Code polling opera- tion and you want to keep this key programmed for an F-Code polling operation, use these instructions to make changes.

If you want to assign this key to a completely different operation, overwrite a previously stored command to the new one.

Option 2: Perform the command at a cer- tain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should per- form the command.

Enter Trnsmit Time� 00/17:05

Clear Enter

3 Press [Enter].

4 Use the numeric keypad to enter the fax num- ber exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 charac- ters in length.

79:

Enter fax number.�

_

13 Press [Enter], [Exit].

14 The machine will return to step 2.

Note: When the F-Code transmission is programmed, the symbol will appear in the programmable one-touch number list on the LCD.

Note: When the delayed transmission is programmed, the symbol will appear in the programmable one-touch number list on the LCD.

If you want to enter or change another key’s programming, repeat steps 2-14. If you do not want to enter or change any other key’s programming, press

5 Press [Enter].

6 Select “FCodePolling” and press [Enter].

7 Use the numeric keypad to enter the ITU-Tsub- address for the box to which you want to send the document.

8 Press [Enter].

- Clear Enter

FCodePolling

Enter sub-address.�

_

SubAddress :

Password :

RESET. Your machine returns to standby mode.

Clear Enter

3.58