Muratec Fax Machine Mixed length transmission, Enlarge transmission, Polling Duplex Tx Code Tx

Mixed length transmission

When you want to send the various sized documents with the ADF, turn this feature on.

Note: When you use the FBS glass, you do not need to turn this on.

Acceptable document size

Acceptable document size for the mixed length transmission is as follows:

Half-letter		, Letter	, Legal
	or
Letter	, Ledger

Advanced fax

Enlarge transmission

You can transmit your document with enlarging.

Note: Enlargement is available only with the FBS.

Note: You can select a preset enlargement ratio, or directly enter the ratio using the numeric keypad. Also, you can use cursor key to enter the ratio.

Note: You can enter the enlargement ratio from 100% through 400% in 1% steps.

Here’s how:

1 Place the document on the FBS glass and select resolution and contrast you require.

To send mixed length documents:

1	Set your documents face up into the ADF.
2	Adjust the document guide to fit the docu-
	ments.

3 Press MENU.

4 Select “Mix Length” using the cursor key and then press [Enter].

5 Adjust resolution, contrast and memory trans- mission, if necessary.

Communication Options

Use cursor to select� item.

Delayed Tx	Cont Polling
Batch Tx	Fax� & Copy
Polling	Duplex Tx
F-Code Tx	Mix Length
FCodePolling

Fax Set Mach Set Enter

2	Press NEXT, [EnlrgeTx].
3	If you want to select area that will be enlarged,
	proceed to step 4.
	Otherwise, skip to step 5.
4	Press [ScanSize] then select scan size that
	will be enlarged.
	Then press [Enter].
	Note: Refer to “Select scanning area to be
	sent,” page 3.2.
5	Enter enlargement ratio.
	You can use the REDUCE/ENLARGE key, or
	of the cursor key or numeric keypad to enter
	enlargement ratio.
6	Press [Enter].

Scan Size

Use cursor to select� scanning width.

Auto H.LTR

11x17 Letter

Legal H.LTR

Letter

Enter

EnlargeTx:

Set the enlarge ratio.

Doc.Size : Letter

Ratio : 100%

Fax Features Getting Started

6 Enter the fax number.

Also, enter any access codes necessary, just as you would for a regular phone call. (Example: Enter 9 to “dial out” from an office telephone system, or 1 for long-distance.)

7 Press START.

Important: If you want to cancel a transmission while scanning the docu- ment, press the STOP key.

If you want to cancel a transmission in progress, use the Job Review function. (See page 3.29.)

7 Enter the fax number and press START.

ScanSize Enter

3.33