Muratec Fax Machine Code transmission and polling, Code polling, Enter sub-address, FCodePolling

Advanced fax

F-Code transmission and polling

With F-Code, your machine can send secure transmissions, perform relay broadcast initiations and even poll from other ITU-T-equipped machines, regardless of manu- facturer.

You can do this two ways:

•Using the programmable one-touch key (see pages 3.54–3.60).

•Entering the ITU-Tsub-address and password directly, which is what we’ll describe here.

Note: For F-Code communication to work, three things must be true:

•The remote fax machine must support ITU-Tsub-addressing

•The remote fax must have a mailbox with an ITU-Tsub-address created on it

•You must know the ITU-Tsub-address and password (if any) for the remote machine’s mailbox

F-Code transmission

1	Place the document and select the resolution and contrast you require.
2	If you want to toggle between manual transmission and memory transmis-

9 Enter the fax number either by pressing a one- touch key, entering a speed-dial number or dialing from the numeric keypad.

Important: Do not press START, if you want to delay this transmission.

10 What you do now depends on when you want the transmission to begin.

•To have it begin now, skip to step 13.

•To delay it, go on to step 11.

11 Press MENU, select “Delayed Tx” and then press [Enter].

The LCD shows (see right):

12 Use the numeric keypad to enter the day and time when the transmission should begin, then press [Enter].

13 Press START.

F-Code Tx

Enter fax number.�

_

Group Clear Broadcas

Delayed Tx

Enter Trnsmit Time� 04/14:20

Clear Enter

	sion, press MEMORY TRANSMIT.
3	Press MENU and select “F-Code Tx”.
4	Press [Enter].	F-Code Tx
5
	Use the numeric keypad to enter the appropri-	Enter sub-address.�
		_
	ate sub-address in the remote machine.
		SubAddress	:
	Note: If you make a mistake, press [Clear] to	Password	:
	erase the character, then enter the cor-
	rect number.
6	Press [Enter].	Clear		Enter
7	Use the numeric keypad to enter the password.
	Note: If this sub-address does not have a password, skip to step 8.
8	Press [Enter].

If in step 10 you chose an immediate transmission, your fax machine begins dialing. If you chose a delayed command, the machine shows “Reserved” on the LCD, indicat- ing that it has stored the command in memory and will complete it later.

F-Code polling

1		FCodePolling
	Press MENU and select “FCodePolling”.	Enter sub-address.�
		_
2	Press [Enter].	SubAddress	:
		Password	:
3	Use the numeric keypad to enter the appropri-
	ate sub-address in the remote machine.	Clear		Enter
	Note: If you make a mistake, press [Clear] to
	erase the character, then enter the correct number.
4	Press [Enter].
5	Use the numeric keypad to enter the password.
	Note: If this sub-address does not have a password, skip to next step.
6	Press [Enter].

3.52