Muratec Fax Machine installation manual Setting the number of rings, Adjusting the print settings

Adjusting the print settings

Default setting: Rx reduction rate: Normal, Reduction margin: 40 mm, Paper saving:OFF.

Fax settings

Setting ECM

Default setting: ON.

1 Press MENU, J, 0, 2, [Enter].

2 Select item you want to set using the cursor key. Then press [Enter].

3 Select desired item and then press [Enter]. 4 If2-3.you want to change other items, repeat step

5 When you finish, press [Exit].

6 Press RESET to return to the standby mode.

02.Print Settings

Use cursor to select� item.

Rx Reduc.Rate:Normal Reduc. Margin:40 mm Paper Saving :OFF

ExitEnter

“Line noise,” or static on the line during a call, can easily disrupt the flow of data from one fax machine to another.

That’s why your fax machine gives you the option of using Error Correction Mode (ECM). When two fax machines communicate while running in ECM, the sending machine automatically checks the data as it sends. If the receiving fax machine can’t verify the transmission, the first machine will re-send it as necessary.

Note: ECM gives you a better chance of transmitting a fax document over a bad phone line, but it could also slow down the transmission time. And the worse the line is, the slower the transmission. That’s why the machine lets you turn ECM on or off as needed.

Note: Not all fax machines have ECM. If you’ve activated ECM and then transmit to a fax machine not currently using ECM, there will be no change in the fax transmission from a usual, non-ECMtransmission.

Getting Started

Setting the number of rings

Default setting: 2 time.

You can set how many times your fax machine will ring before answering a call. Choose from 1 to 10 rings.

1 Press MENU, J, 0, 7, [Enter].

The LCD shows the current ECM setting:

2 Select “On” or “Off” using the cursor key.

07.ECM Mode

Use cursor to select� ON or OFF.

ON

OFF

Features

1 Press MENU, J, 0, 5, [Enter]. The LCD shows:

2 Use the numeric keypad to enter the number of rings you want, from 01 to 10.

Note: If you enter 00 (zero), the machine will beep briefly to warn you that it can’t accept that setting.

3 Press [Enter] to save the setting.

4 Press RESET to return to the standby mode.

05.Number of Rings

Set # of rings. (01-10) 02 time.

#Of Rings : 2 time(01-10)

Enter

3 Press [Enter] to save the setting.

4 Press RESET to return to the standby mode.

Enter

Fax

3.73