Muratec Fax Machine Using a relay box, Erasing an empty F-Code box, 02Bulletin Box, 03Not stored

5	Select the file number (01-30) of the document you want to erase.
	If you want to erase the all documents in this bulletin box, select file number
	“00”.
6		02:Bulletin Box	EraseDoc
	Press [Enter].	OK to erase?
	The LCD shows (see right):
		00:All stored documents.
	Important: If you want to quit without eras-	01:Already stored.
		02:Already stored.
	ing the document you’ve selected,
		03:Not stored.
	press [Cancel]. The fax will	04:Not stored.
7	return to step 2.	Cancel	Erase
	Press [Erase] to erase the document(s) and the
	machine will return to step 2.

If you want to erase other document, repeat steps 2–7.

To return to the standby mode, press RESET.

Using a relay box

Once your fax machine receives a document via ITU-Tsub-addressing to one of its F-Code relay boxes, it sends it to the other fax machines that you’ve set up on your relay box. (See “Creating or Modifying an F-Code box”, page 3.44–3.48.)

If you set the Auto print mode to on when you created the relay box, your machine will print the received document, then relay it to the other machine. Otherwise, your machine will only relay it to the other machines, not print it. See “If you chose Relay,” page 3.50 for more details on this setting.

Also, you can send (relay broadcast initiation) the document to another hub machine’s F-Code box and get that machine to relay it to others. See “F-Code trans- mission” on page 3.52 for more detail.

The hub performs a relay broadcast, and the machine which sends the original doc- ument to the hub has performed a relay broadcast initiation.

Advanced fax

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in these steps which is not empty, the machine beeps. If this happens, print all docu- ments in that box before erasing it.)

To erase an empty F-Code box:

1 Press MENU, N, [Enter].

2 Select the F-Code box you want to erase.

3 Press [EraseBox]. If the F-Code box is empty, the machine prompts you to enter I.D. code.

4 Use the numeric keypad to enter your F-Code box’s four-digit I.D. code.

5 Press [Enter].

The LCD shows (see right):

Note: If you want to quit without erasing the F-Code box you’ve selected, press [Cancel]. The machine will return to step 2.

Note: If you want to quit without erasing any F-Code box, press RESET. The machine returns to standby mode.

6 Press [Erase] to erase the document(s) and the machine will return to step 2. If you want to erase other F-Code box, repeat steps 2–6.

To return to the standby mode, press RESET.

Fax Features Getting Started

3.51