Muratec Fax Machine Programmable one-touch keys, Using the power of programmable one-touch keys

Delayed Tx

Enter Trnsmit Time� 00/17:05

Next, tell your fax to carry out this delayed command one of these ways:

Delayed Tx

Enter Trnsmit Time� 30/17:05

Advanced fax

Programmable one-touch keys

Using the power of programmable one-touch keys

In order to complete some operations on your machine, you may have to follow sev- eral steps and press several different buttons. But programming your machine’s one-touch keys (79–84) can reduce those many steps to a simple press of a key.

You can “teach” the one-touch keys to carry out any of the following operations:

Communications functions:

• Delayed transmission (explained on page 3.25)
•	Broadcasting (page 3.24)
• Regular polling (not continuous) (pages 3.34–3.35)
• Batch transmission (pages 3.26–3.28)
•	F-Code transmission (page 3.52)

4 Use the numeric keypad to enter the fax num- ber exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 charac- ters in length.

5 Press [Enter].

6 Select “Delayed Tx” and press [Enter].

7

79:

Enter fax number.�

_

- Clear Enter

• F-Code polling (pages 3.52–3.53)

Programming a delayed transmission

To program a delayed transmission into a programmable one-touch key:

Option 1: Perform the command once at a certain time on a certain day of the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the

numeric keypad to enter the dateClear Enter and time when the fax should perform the command.

1 Press MENU, C, [Enter].

The LCD shows the programmable one-touch number list.

2 Select the programmable one-touch number that you want to program or change.

C.Prog.One-Touch

Select p-one-touch.(79-84)

79:

80:

81:

82: 83:

Detail Erase Enter

Option 2: Perform the command at a cer- tain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the

numeric keypad to enter 0, 0 andClear Enter then the time the fax should perform the command.

Note: If you’re changing a previously stored command:

If your previous command for this key was a delayed operation and you want to keep this key programmed for a delayed operation, use these instructions to make changes.

If you want to assign this key to a completely different operation, overwrite a previously stored command to the new one.

3 Press [Enter].

8 Press [Enter], [Exit].

9 The machine will return to step 2.

Note: When the delayed transmission is programmed, the symbol is appeared in the programmable one-touch number list on the LCD.

If you want to enter or change another key’s programming, repeat steps 2-9. If you do not want to enter or change any other key’s programming, press RESET. Your machine returns to standby mode.

3.54