Muratec Fax Machine Machine is not functioning as designed, Symptom Check for/What to do

The machine is not functioning as designed

Symptom	Check for/What to do
The LCD shows nothing.	Is only the ENERGY SAVING key lit up green?
	The machine is in the Energy Saver mode. Press any key
	on the control panel to cancel.
	. . . or . . .
	The power switch is turned OFF.
	Turn the power switch ON.
	. . . or . . .
	The LCD contrast volume is turned to the excessively light
	or dark position.
	Viewing the LCD, adjust the LCD contrast volume as neces-
	sary.
Control panel keys	Is only the ENERGY SAVING key lit up LED?
do not respond.	The machine is in the auto power off mode.
	Press ENERGY SAVING key on the control panel to cancel.
	. . . or . . .
	The power switch is turned OFF.
	Turn the power switch ON.
The machine is not	The power cord is left unplugged from the power outlet.
activated when the	Plug the power cord into the power outlet.
power switch is turned
ON.
Misfeeds occur	Paper size setting is incorrect.
frequently.	Set the correct paper size.
Some of the selected	Selected functions cannot be combined.
functions are	Check the combination of functions. (See “Combination
unavailable.	chart,” pages AI.4–AI.5.)
In EraseBorder or	Margin is too wide. Or, margin of your document is too
EraseCenter mode,	narrow.
parts of the original	Set the narrower margin.
image are not copied.

		Just in case
Symptom	Check for/What to do
In Combine mode,	Your set originals are not identical in size and direction.
parts of the image are	It is impossible to combine originals as they are not
not copied or parts	identical in size and direction. Copy these originals with
of the copy paper are	the same size paper, set copies which are identical in size
blank.	and direction, and then select Combine.
In Combine mode,	Your originals are set in incorrect order.
order of copies is not	When you set a stack of originals in the ADF, the first page
correct.	must be on top.
	When you set an original on the FBS glass, start with the
	first page to be copied.		Started
order of copies is not	When you set a stack of originals in the ADF, the first page
In Duplex copy mode,	Your originals are set in incorrect order.
correct.	must be on top.		Getting
	first page to be copied.
	When you set an original on the FBS glass, start with the

Just in Case

5.15