Muratec Fax Machine installation manual Select Repeat using the cursor key, and then press Enter

Press MENU.

Advanced Copy

To make copy with repeat:

1

2 Select “Repeat” using the cursor key, and then press [Enter].

Note: The Auto Reduce/Enlarge is selected automatically.

3 Select the desired repeat modes using the cur- sor key.

Repeat

Use cursor to select. Ratio:Auto

# of Rep.

2 4 8

Paper

Letter

Paper Cancel Enter

13	The Repeat icon will be displayed on the LCD.	Copy Ready	Auto	Set 1
		Repeat�
		Setting complete
14	Set the documents.	Paper	Zoom	Sort

Note: Set the documents in the same direction as you see on the LCD in step 5.

	Note: The number of documents repeated can be 2, 4 or 8.
4	If you want to change the recording paper size for combining, proceed to next
	step. Otherwise, skip to step 6.
5	Press [Paper] to select the paper size, and then press [Enter].
6	You can insert the separator lines between repeated images. If you want to
	insert the separator lines, proceed to next step. Otherwise, skip to step 8.

If you set your documents in the ADF:

Press START. After all the documents in the ADF are scanned, the copies will be printed.

If you set your document on FBS glass:

Press START after setting the first page of your documents on the FBS glass. Then set the next page of your document, then press [Start].

After all your documents are scanned, press [Exit].

7 Press NEXT and then press [Line] to print the separator lines. To cancel the separator lines, press [Line] again.

Note: The width of the line can be changed. (See page 2.28.)

Repeat

Use cursor to select.

Ratio:Auto

# of Rep.

2 4 8

Paper

Letter

LayoutLine

8	If you want to change the layout, proceed to next step. Otherwise, skip to step
	12.
	Note: Use this function, when you set the reduction/enlargement ratio by
	yourself.
9		Repeat
	Press [Layout], the LCD will show:	Use cursor to select�
		layout.
	Note: If [Layout] does not appear on the LCD,
		Layout�
	press NEXT until it appears.
10	Select the layout using the cursor key.	Mode
		Mod1 Mod2
11	Press [Enter] to save the layout setting.	Enter
12	Press [Enter] to save the setting.
	Note: If [Enter] does not appear on the LCD, press NEXT.

Note: To cancel the setting of the combine function, press CLEAR.

2.12